DIY Platform Bed With Floating Night Stands


In this video, I will be making a King size platform bed. Plans are now available here. This bed has a few features that I can appreciate. Enjoy the video.
Subscribe for more amazing DIY projects

Find me on social
Instagram:
Facebook:

Get the KING plans here.
Get the QUEEN plans here

—————————–Price Breakdown————————————-
King BED and electronics
– Wood $219
– Accessories brackets etc.. $65.00
– Electronics $165
Total investment = $449.00

————————————-Tools I used————————————-
– Measuring tape
– Miter Saw
– Orbital sander
– 80 grit sandpaper
– 120 grit sandpaper
– 220 grit sandpaper
– Keter workbench –
– Rockler Clamps –
– Dowel jig
– Pocket hole jig
– Drill
– Jigsaw
– Mallet
– Combination square
– Framing square
– Wood glue

————————————-Material used ————————————-

Wood———————————————————

Note: Wood may not be actual size listed below. For example (2 by 4 is actual 1.5 by 3.5) 4
– ( 16) 2 by 8 Lumber (headboard, bed frame and bed trim)
– (1) 2 by 12 lumber (top and bottom night stand)
– (1) sheet or 3/4in (19.05mm) plywood a small piece
– (2) sheet of 1/4in (6.35mm) plywood
– (10) 1 by 4 (25.4mm by 101.6mm) lumber
– (4) 2 by 4 (50.8mm by 101.6mm) Lumber

Other accessories—————————————-

– (4 packs) Corner brace (outside of the bed trim and inside bed foot)
– (2 packs) Corner brace (inside the bed trim )
– (1 packs) Mending plate (bed foot frame)
– L- brackets for the bed frame
– 1/4in – 20 inserts (to mount the night stand)
– 1/4in round head Philips 3in long
– 1/4in Washer
– #10 Screws (2 in)
– #8 Screws (1.5in)

Finish ———————————————————

– Danish oil
– Wipe on poly
– Foam roller
– Black paint

LED, Electrical, and wire ——————————

– Puck Lights
– Led Strip
– Round switch
– (2) Outlet with USB ports
– (2 ) outlet cover
– (2) workbox [junction box]
– Electrical wire(for the outlet)
– Receptacle Tester –
– 22 gauge wire (for the puck light switch)
– Extension cord