HOME : Interior Decorating Ideas

BLOG: Http://beautifymeeh.blogspot.com

Hey everyone! So I decided to make this special video for you all to give you tips/ideas (not only to beautify yourself) to beautify your home. Ever since I got married, I ENJOY shopping for homegoods/decorations. I will have a “open house tour” video for you soon sometime next week to show your around our new house after all the furnitures come in!

I purchased all the items mentioned in this video at Michael’s craft store (except 4 things – Sur La Table).

Thanks for watching! Stay tuned to my channel! =)

“Playing Favorites” (The Starting Line) | Meaning In Masterpiece


MIMday #1
The reason we are starting this series is because in early 2010 we played an acoustic show every single Wednesday night down in Sunset Beach, CA at King Neptunes. Those days meant a lot to us and these videos help us remember those days….ENJOY!
The Starting Line “Playing Favorites” covered by Meaning In Masterpiece

“Playing Favorites” by The Starting Line :

i guess the most that i can do
is make a call and tell you the truth
sing the words in melody
and hope that you’ll believe me
here’s another song for you
so this one this one makes two
i still don’t know where to begin
i’ll just leave it at this

i’m sure you always feel my eyes on you
but i hope that you will never feel unwanted

wait for me to move out west
it’s ok if you don’t
i hope you know
you’re my favorite thing
about the west coast
i wish i stayed
i hope you wait
so here i am
counting down the days
till california comes

this is the least that i can do
you know i’m bad at calling you
the best way i can extend
the lonely words i miss you
i’ll say it but i’m sure you knew
you’re what i look most forward to
coming back to where i’ve been
i’ll just leave it at this

i’m sure you always feel my eyes on you
but i hope that you will never feel unwanted
if you feel unwanted

[chorus x2:]
wait for me to move out west
it’s ok if you don’t
i hope you know
you’re my favorite thing
about the west coast
i wish i stayed
i hope you wait
so here i am
counting down the days
till california comes

till california comes

How to Balance Heating System Radiators – Plumbing Tips

| | | |

A brief video on how to balance heating system radiators. Includes lockshield positions and TRV’s. Plumbing Tips – diy.

For more information visit our website at

Today I’m going to tell you about balancing heating systems, why you should do it,
the symptoms that mean you might have to do it, and how to do it. Firstly let’s have a look at the general layout of a heating system.
We’ll have a look at it schematically because that will help you understand why balancing a heating system is so important. Let’s say we have two storeys; Level 1 and gound with the boiler at the bottom.
Coming out of the boiler we have a pump that goes up, through a diverter valve, through some radiators upstairs
and then downstairs with common returns
going back to the boiler. OK? So you’ve got radiators here.
The first reason that a heating system should be balanced
is even if there’s a pump on a heating system
hot water naturally likes to gravitate up
and stay upstairs and then make it’s quick route back to the boiler.
So what you often find is the radiators upstairs are getting loads of heat
and the ones downstairs are still really quite cool
so what you should do is go to the lockshields on the radiators upstairs
close them, then open them at about a quarter of a turn.
You won’t notice any difference in the radiator’s heat capacity or not
but you will notice that more hot water flow is diverted to the radiators downstairs.
Now, you go downstairs, make sure that the radiators are open
and that means the heating system should
be balanced. Another reason you should balance a heating system
is, say, this radiator is getting hot, that one’s getting hot,
and this one’s getting hot, the last radiator on the line isn’t getting so hot
and that’s because these radiators are
effectively pinching the hot water flow delivered by the boiler and the pump.
What you do then is remove the lockshields on these radiators here
strangle those two up there down, shut them,
give them a quarter of a turn. This one here
bring that down, ok, and shut them and give them a quarter of a turn.
We also do a video on why one radiator isn’t getting hot, ‘cos it can
be more than one reason,
not just the fact that the heating system isn’t balanced.
Now that is a brief idea of how you balance a system and why.
Now let’s take a quick look at the lockshield
how to shut it and also to give it a quarter turn nip to make sure that it is all balanced.
So here we are, upstairs, ok. Now the radiators up here get really hot so let’s have a look
at how we’re going to strangle this one down and balance this system.
So here we are with our first upstairs radiator.
There’s four on this system upstairs and do the same thing to each one. Here’s the lockshield end, not the TRV end. Pop the lockshield cap off and close it
by turning it anti clockwise
Once it’s fully closed
just slack it back a quarter of a turn.
Do that to each radiator upstairs and you should find then that the radiator side of the heating system is balanced.
Now let’s look at what we can do to balance out
the hot water coil on your heating cylinder if you have an indirect one. Right, so we’ve
had a look at how to balance the radiators on the heating system.
Now we’re going to have a look at
how to balance the hot water coil on the indirect cylinder.
Alot of houses in the UK have indirect hot water coils on the cylinder.
That means that hot water from the boiler is passed through a coil
in the cylinder and that heats the water up.
Now often these coils are 22mm in pipe size and when the valve opens up
to let hot water through that coil, it pinches loads of heat from the radiators.
Therefore the indirect hot water coil should also be balanced and regulated.
Most plumbers installing an indirect hot water cylinder will put a flow regulating valve
on the return side of the coil Let’s have a look at it.
So, you have your boiler, your pump and your 3-port valve, or if you’ve got an s-plan
it will just be a 2-port valve for each side.
You have all your radiators with their flows and returns. We have the flow coming up here from the boiler, goes through the valve into our hot water coil, in our cylinder
and back out. It is here where we fit our flow regulating valve,
on the return side of the hot water coil. That will go back
into the return side of the boiler.
So, to recap, we have the boiler, the pump, and our diverter valves.
The radiators upstairs have been strangled down and regulated
and the ones downstairs are getting a good flow of hot water.
We’ve also strangled down the return on the indirect hot water cylinder
and the whole heating system now is working properly.
Remember! Balancing a heating system out all you have to do is give each component in the heating system an equal amount of flow

Baby Bunny Jumps and Hops!!

Just brought home my new baby bunny!! I totally catch him hopping on command he is amazing!! His name is “Excalibur!!” his brother Ari Gold is also in the video but he’s shy and hungry lol

Barbarion – My Rock (Official Video)

UPDATE MAY 2017 – Check us out Live at Black Pearl –

And here’s another great video by us: RAM THE WORLD

My Rock:
Director: DAVE BUDGE
Cinematographer: JOEL BETTS
Production Design: PAUL STANLEY
Recording Engineer: CHRIS FATOUROS
Intro Titles: MATT SLATER
Post Production: ACTIVE MOTION

Design and paint rooms using Photoshop CS5 (Voice Tutorial)

Hello, my name is Doug and im attending ITT Tech for a Associates Degree in Visual Communications. This was the first project for the class and i will be uploading every project. The projects will be posted once a week. Also this is a good way for me to practice what i learned and also making these videos is a good idea because i have them to look back on if i need help.

Leave feedback and follow me on twitter. Video responses will be shown so send em in!
Channel Twitter


Learn How to Paint Cars using Photoshop

Learn How to do Selective Coloring with Photoshop

Learn How to Restore Photos using Photoshop

How to Enlarge Breasts Using Photoshop (Voice Tutorial)

Needlepoint Area Rugs Decorating with Cindy Rinfret, 1

How to decorate with needlepoint area rugs. Famous east coast interior designer Cindy Rinfret instructs with examples from a prestigious seaside suite she recently decorated. Where to start a design, how to select rugs for adjoining rooms, how to select the “statement: rug. Part 1 of 6.